How to change the background on a emachines 250 series netbook with windows 7?
Q. I recently purchased a new emachines netbook, and I would like to change the panel but even when I go to display on the control panel, or try to directly set a picture as my background from the internet it will not change.
Asked by Gabriel - Wed Feb 24 23:06:09 2010 - - 4 Answers - 0 Comments
A. Hi Gabriel, Mercuri is correct. You cannot change your background with Windows 7 Starter. However, you can use Windows Anytime Upgrade to upgrade to another edition of Windows 7 that will allow you to change your desktop background and get even more features and functionality out of your OS. For more information visit: Cheers, Cassandra Microsoft Windows Outreach
Answered by Cassandra - Thu Feb 25 15:07:48 2010
Q. I recently purchased a new emachines netbook, and I would like to change the panel but even when I go to display on the control panel, or try to directly set a picture as my background from the internet it will not change.
Asked by Gabriel - Wed Feb 24 23:06:09 2010 - - 4 Answers - 0 Comments
A. Hi Gabriel, Mercuri is correct. You cannot change your background with Windows 7 Starter. However, you can use Windows Anytime Upgrade to upgrade to another edition of Windows 7 that will allow you to change your desktop background and get even more features and functionality out of your OS. For more information visit: Cheers, Cassandra Microsoft Windows Outreach
Answered by Cassandra - Thu Feb 25 15:07:48 2010
How do i get the drivers for my soundcard on my Emachines E4252?
Q. I have an Emachines E4252. However, i uninstalled Vista and put XP on it because it's more stable than vista. I have managed to get everything working apart from my soundcard. So, does anyone know where i can get the drivers for the soundcard on this computer? Thanks.
Asked by jakeeyp123 - Fri Jul 25 04:34:40 2008 - - 1 Answers - 1 Comments
A. You need to use an automatic updater like the one found on It will check your computer and then search through over a million drivers for the most updated for your ALL your devices not just the one for your sound card. You can also backup the drivers once you get them all up to date to make the task simpler next time!
Answered by PCSetupGuide.com - Sat Jul 26 11:43:49 2008
Q. I have an Emachines E4252. However, i uninstalled Vista and put XP on it because it's more stable than vista. I have managed to get everything working apart from my soundcard. So, does anyone know where i can get the drivers for the soundcard on this computer? Thanks.
Asked by jakeeyp123 - Fri Jul 25 04:34:40 2008 - - 1 Answers - 1 Comments
A. You need to use an automatic updater like the one found on It will check your computer and then search through over a million drivers for the most updated for your ALL your devices not just the one for your sound card. You can also backup the drivers once you get them all up to date to make the task simpler next time!
Answered by PCSetupGuide.com - Sat Jul 26 11:43:49 2008
Is it safe to use an emachines restore disk on a dell?
Q. I have an eMachines restore disk for a PC I bought, and I also have a dell laptop. Will the Emachines restore cd work on the Dell laptop or will it mess it up? The laptop already is messed up; which is why I am trying to use this restore CD.
Asked by kylethekiddd9 - Thu Aug 27 17:26:42 2009 - - 5 Answers - 0 Comments
A. What do you think is going to happen if you put a bicycle tire on a car? IT WON'T WORK. actually you could damage some hardware since the emachines restore cd includes drivers specific for the emachine and not compatible on dell. JUST DON'T do it or even try it. what can you do? find windows installation cd, do a clean install of windows.
Answered by D'ohh? - Thu Aug 27 17:37:50 2009
Q. I have an eMachines restore disk for a PC I bought, and I also have a dell laptop. Will the Emachines restore cd work on the Dell laptop or will it mess it up? The laptop already is messed up; which is why I am trying to use this restore CD.
Asked by kylethekiddd9 - Thu Aug 27 17:26:42 2009 - - 5 Answers - 0 Comments
A. What do you think is going to happen if you put a bicycle tire on a car? IT WON'T WORK. actually you could damage some hardware since the emachines restore cd includes drivers specific for the emachine and not compatible on dell. JUST DON'T do it or even try it. what can you do? find windows installation cd, do a clean install of windows.
Answered by D'ohh? - Thu Aug 27 17:37:50 2009
How do I use the eMachines Recovery Manager to restore my computer?
Q. I have an eMachines EL1200 and I want to know how do I use the recovery manager to restore my computer? My computer has 1 or more viruses on it from people using it and doing things on it they shouldn't and I want to make I brand new with the recovery manager since the computer didn't come with a disk to format the computer with.
Asked by the tman - Mon Jun 15 05:02:44 2009 - - 1 Answers - 0 Comments
A. Most emachines are now being delivered without a recovery disk, which means you have to make your own using the recovery software and blank dvds. The best thing you can do is get virus software and completely remove the virus. Hijackthis will also help to completely eliminate those hidden aspects of the virus. Only after your have removed the virus should you create a clean recovery disk in case you need it in the future.
Answered by z z z z - Tue Jun 16 20:35:28 2009
Q. I have an eMachines EL1200 and I want to know how do I use the recovery manager to restore my computer? My computer has 1 or more viruses on it from people using it and doing things on it they shouldn't and I want to make I brand new with the recovery manager since the computer didn't come with a disk to format the computer with.
Asked by the tman - Mon Jun 15 05:02:44 2009 - - 1 Answers - 0 Comments
A. Most emachines are now being delivered without a recovery disk, which means you have to make your own using the recovery software and blank dvds. The best thing you can do is get virus software and completely remove the virus. Hijackthis will also help to completely eliminate those hidden aspects of the virus. Only after your have removed the virus should you create a clean recovery disk in case you need it in the future.
Answered by z z z z - Tue Jun 16 20:35:28 2009
What kind of Memory does my EMachines T828 Use?
Q. I was wondering what type of memory my EMachines T3828 uses? I know it takes PC2700 DDR333, but I wanted to know if it takes "Low density, or high density memory"?
Asked by TD - Fri Jul 31 15:24:59 2009 - - 2 Answers - 0 Comments
A. Wow, this low density and high density stuff is confusing. Near as I can tell, your manual should state whether it can use high density memory. I would recommend going to one of the places which identifies what memory you need (like the link).
Answered by Jason S - Fri Jul 31 15:56:41 2009
Q. I was wondering what type of memory my EMachines T3828 uses? I know it takes PC2700 DDR333, but I wanted to know if it takes "Low density, or high density memory"?
Asked by TD - Fri Jul 31 15:24:59 2009 - - 2 Answers - 0 Comments
A. Wow, this low density and high density stuff is confusing. Near as I can tell, your manual should state whether it can use high density memory. I would recommend going to one of the places which identifies what memory you need (like the link).
Answered by Jason S - Fri Jul 31 15:56:41 2009
What kinds of processors are compatable with my eMachines?
Q. I have an eMachines ET 1831-01 desktop PC with an Intel Celeron 1.6ghz processor. The motherboard is an EMCP73VT-PM but I cannot find the specific info on it as far as what processors are compatible,. However I did find out that its a socket 775 LGA.
Asked by Rusty Shackelford - Wed Dec 16 15:18:59 2009 - - 2 Answers - 0 Comments
A. You'll have to get a CPU that is LGA 775, then ;). That means Intel, the Core 2 lineup. If I were you, I'd take a look at the Intel Core 2 Duo e7x00 dual cores or the e8400. The e8400 is a simply outstanding processor.
Answered by Scott - Wed Dec 16 15:30:07 2009
Q. I have an eMachines ET 1831-01 desktop PC with an Intel Celeron 1.6ghz processor. The motherboard is an EMCP73VT-PM but I cannot find the specific info on it as far as what processors are compatible,. However I did find out that its a socket 775 LGA.
Asked by Rusty Shackelford - Wed Dec 16 15:18:59 2009 - - 2 Answers - 0 Comments
A. You'll have to get a CPU that is LGA 775, then ;). That means Intel, the Core 2 lineup. If I were you, I'd take a look at the Intel Core 2 Duo e7x00 dual cores or the e8400. The e8400 is a simply outstanding processor.
Answered by Scott - Wed Dec 16 15:30:07 2009
Where can you buy the Emachines W3118 disc drivers?
Q. Do I need to order from the Emachines company? Or can I buy it through a computer store or some other venue? My system crashed and I had to reformate the whole thing, now I have none of the drivers to get my internet back up and running!
Asked by Marna S - Mon Sep 29 22:32:00 2008 - - 3 Answers - 0 Comments
A. You can get all the drivers you need at their site for FREE Go to e4me.com, click on customer care, then product support and downloads. Then choose desktop series and model. This will open up the page with your downloads on it Click the plus button by the word downloads to open it up The main set of drivers your needing right now is the motherboard driver package. Download it on another computer and save to a flash drive or write to a cd. then put it into your computer. then double click to unzip then navigate to the Cabs folder under the C drive open up it's subfolder and click setup.exe to install here's the download page for it all
Answered by Patrick W - Tue Sep 30 12:08:59 2008
Q. Do I need to order from the Emachines company? Or can I buy it through a computer store or some other venue? My system crashed and I had to reformate the whole thing, now I have none of the drivers to get my internet back up and running!
Asked by Marna S - Mon Sep 29 22:32:00 2008 - - 3 Answers - 0 Comments
A. You can get all the drivers you need at their site for FREE Go to e4me.com, click on customer care, then product support and downloads. Then choose desktop series and model. This will open up the page with your downloads on it Click the plus button by the word downloads to open it up The main set of drivers your needing right now is the motherboard driver package. Download it on another computer and save to a flash drive or write to a cd. then put it into your computer. then double click to unzip then navigate to the Cabs folder under the C drive open up it's subfolder and click setup.exe to install here's the download page for it all
Answered by Patrick W - Tue Sep 30 12:08:59 2008
How do i get my webcam to work on my emachines laptop?
Q. i have a emachines D620 laptop with webcam. The webcam works on like msn and stuff, but when i want to take pictures with it, it dosent work. Can someone please give me step by step instructions to get it to work.
Asked by <3 - Tue May 5 20:59:35 2009 - - 1 Answers - 0 Comments
A. i have the same laptop and i have heard that u can only use the web cam to do video calls etc... but i have never looked into it. maybe there is a program that u can download that will allow u to take pictures with it. maybe u should do a little research on google to see if theres a program that will work with any laptop. that also allows u to take picture and such.
Answered by Michael - Wed May 6 19:44:18 2009
Q. i have a emachines D620 laptop with webcam. The webcam works on like msn and stuff, but when i want to take pictures with it, it dosent work. Can someone please give me step by step instructions to get it to work.
Asked by <3 - Tue May 5 20:59:35 2009 - - 1 Answers - 0 Comments
A. i have the same laptop and i have heard that u can only use the web cam to do video calls etc... but i have never looked into it. maybe there is a program that u can download that will allow u to take pictures with it. maybe u should do a little research on google to see if theres a program that will work with any laptop. that also allows u to take picture and such.
Answered by Michael - Wed May 6 19:44:18 2009
Where can I download a free Recovery CD for an eMachines computer?
Q. My eMachines T3302 Desktop PC will not start properly. It says to press F11 for recovery and when I do, it asks for a Recovery CD/DVD. Does anybody know where I can download a free Recovery CD for this model?
Asked by Eat Mor PB&J... - Tue Jan 20 19:32:31 2009 - - 1 Answers - 0 Comments
A. i think u can find here
Answered by Raj 400 - Tue Jan 20 22:35:38 2009
Q. My eMachines T3302 Desktop PC will not start properly. It says to press F11 for recovery and when I do, it asks for a Recovery CD/DVD. Does anybody know where I can download a free Recovery CD for this model?
Asked by Eat Mor PB&J... - Tue Jan 20 19:32:31 2009 - - 1 Answers - 0 Comments
A. i think u can find here
Answered by Raj 400 - Tue Jan 20 22:35:38 2009
eMachines T5212 display settings were set wrong so black screen after BIOS at startup. How to fix?
Q. Nothing comes up on screen past BIOS option. Please help! Just need to know if I can fix without losing all info on hard drive. There is no safe mode option at start up. Asked emachines and they wouldn't help me without paying for it.
Asked by Staci B - Fri Jan 9 21:59:47 2009 - - 1 Answers - 0 Comments
A. Computer off, and unplugged. Press the Power On button in, and hold it in for a count of five seconds. Let go. Do this two more times. Plug the computer back into the surge protector. Let it set for a minute. Turn it on. This should set the BIOS Setup parameters back to default. Default is the factory settings. If your computer has a VGA port, in the I/O area for a monitor, plug the monitor in there. (I/O=Input/Output The I/O area is where devices like the mouse, keyboard, etc., plug in) No graphics card has been added, this should do it. BUT, if you added a graphics card to your computer, and have the monitor plugged into the card, PLUS your computer has Integrated Graphics, (The VGA port in the I/O area thing), you need to remove… [cont.]
Answered by Chickster - Fri Jan 9 22:26:03 2009
Q. Nothing comes up on screen past BIOS option. Please help! Just need to know if I can fix without losing all info on hard drive. There is no safe mode option at start up. Asked emachines and they wouldn't help me without paying for it.
Asked by Staci B - Fri Jan 9 21:59:47 2009 - - 1 Answers - 0 Comments
A. Computer off, and unplugged. Press the Power On button in, and hold it in for a count of five seconds. Let go. Do this two more times. Plug the computer back into the surge protector. Let it set for a minute. Turn it on. This should set the BIOS Setup parameters back to default. Default is the factory settings. If your computer has a VGA port, in the I/O area for a monitor, plug the monitor in there. (I/O=Input/Output The I/O area is where devices like the mouse, keyboard, etc., plug in) No graphics card has been added, this should do it. BUT, if you added a graphics card to your computer, and have the monitor plugged into the card, PLUS your computer has Integrated Graphics, (The VGA port in the I/O area thing), you need to remove… [cont.]
Answered by Chickster - Fri Jan 9 22:26:03 2009
How do i reset my emachines laptop to factory settings?
Q. How do i reset my emachines laptop to factory settings. My laptop model number is D620.
Asked by Jazz S - Fri Mar 26 15:39:51 2010 - - 1 Answers - 0 Comments
A. restart the laptop and then press F11 or F12 continously during the start up you will be presented with the options to restore proceed from there. remember if you need any data then you need to back it up .
Answered by karthick - Fri Mar 26 15:45:13 2010
Q. How do i reset my emachines laptop to factory settings. My laptop model number is D620.
Asked by Jazz S - Fri Mar 26 15:39:51 2010 - - 1 Answers - 0 Comments
A. restart the laptop and then press F11 or F12 continously during the start up you will be presented with the options to restore proceed from there. remember if you need any data then you need to back it up .
Answered by karthick - Fri Mar 26 15:45:13 2010
How do I get data off of bad emachines computer?
Q. I have a emachines computer and when I start it up it shows a message on a black screen which has the option "start windows normally" when I select that it shows the windows xp logo with the loading bar and then shuts off. I would like to know how i can get the data from this computer and put it on another computer via flash drive. After I do this i will use the recovery disks.
Asked by kingaberdeen - Sat Mar 20 12:58:07 2010 - - 5 Answers - 0 Comments
A. For insurance purposes,use professional data recovery software.
Answered by Dreamsoul - Sun Mar 21 21:50:09 2010
Q. I have a emachines computer and when I start it up it shows a message on a black screen which has the option "start windows normally" when I select that it shows the windows xp logo with the loading bar and then shuts off. I would like to know how i can get the data from this computer and put it on another computer via flash drive. After I do this i will use the recovery disks.
Asked by kingaberdeen - Sat Mar 20 12:58:07 2010 - - 5 Answers - 0 Comments
A. For insurance purposes,use professional data recovery software.
Answered by Dreamsoul - Sun Mar 21 21:50:09 2010
How do you open an Emachines T3604 Computer?
Q. My uncle brought an EMachines last year and it's running very slow. I would like to add more RAM and more memory into the system.
Asked by lilith572 - Sun Feb 1 23:52:40 2009 - - 2 Answers - 0 Comments
A. On the back, one side should have a couple of thumb screws or regular screws. Unscrew those and the side panel will slide off.
Answered by revolution_cry9 - Sun Feb 1 23:56:42 2009
Q. My uncle brought an EMachines last year and it's running very slow. I would like to add more RAM and more memory into the system.
Asked by lilith572 - Sun Feb 1 23:52:40 2009 - - 2 Answers - 0 Comments
A. On the back, one side should have a couple of thumb screws or regular screws. Unscrew those and the side panel will slide off.
Answered by revolution_cry9 - Sun Feb 1 23:56:42 2009
Where can i get a Multimedia Audio Controller driver for my emachines T2862?
Q. Where can i get a Multimedia Audio Controller driver for my emachines T2862? All i need is that one driver so i can start hearing whats going on the computer. Anyone know where i can download one into a .zip file?
Asked by corvetteaus - Thu Dec 11 19:28:08 2008 - - 2 Answers - 0 Comments
A. You have to register, but it is free
Answered by Jim B - Thu Dec 11 19:33:54 2008
Q. Where can i get a Multimedia Audio Controller driver for my emachines T2862? All i need is that one driver so i can start hearing whats going on the computer. Anyone know where i can download one into a .zip file?
Asked by corvetteaus - Thu Dec 11 19:28:08 2008 - - 2 Answers - 0 Comments
A. You have to register, but it is free
Answered by Jim B - Thu Dec 11 19:33:54 2008
Where do I find a manual for an emachines S1862?
Q. I have been given an emachines model s1862, but it seems to be having issues. I would like to find a manual for it so that I can find out what the issue might be.
Asked by grtech - Fri Dec 30 10:19:19 2005 - - 2 Answers - 0 Comments
A. I just checked and the emachines support page is up. If you go to the middle of the page they have an option to do live chat or email tech support:
Answered by nytsua2003 - Fri Dec 30 10:56:43 2005
Q. I have been given an emachines model s1862, but it seems to be having issues. I would like to find a manual for it so that I can find out what the issue might be.
Asked by grtech - Fri Dec 30 10:19:19 2005 - - 2 Answers - 0 Comments
A. I just checked and the emachines support page is up. If you go to the middle of the page they have an option to do live chat or email tech support:
Answered by nytsua2003 - Fri Dec 30 10:56:43 2005
How do you access the bios in an emachines c2825?
Q. How do you get into the bios of an emachines c2825, I tried pressing the F1 and F2 keys over and over till Windows booted up but that doesn't work.
Asked by Raymond - Wed Jan 16 18:38:20 2008 - - 2 Answers - 0 Comments
A. Most I've seen its the delete key, but a few use esc. On eMachines the bios settings are usually very limited.
Answered by Tater - Wed Jan 16 19:54:05 2008
Q. How do you get into the bios of an emachines c2825, I tried pressing the F1 and F2 keys over and over till Windows booted up but that doesn't work.
Asked by Raymond - Wed Jan 16 18:38:20 2008 - - 2 Answers - 0 Comments
A. Most I've seen its the delete key, but a few use esc. On eMachines the bios settings are usually very limited.
Answered by Tater - Wed Jan 16 19:54:05 2008
How to purchase a emachines restore cd ( t2042) or restore the pc without it?
Q. i have an emachines pc model t2042' it turns on but goes directly to a black screen' unless i input the restore cd, i only i have one, is there any other ways to restoe the computer without the discs? if not where can i find any ?
Asked by Mimi K. - Sun Jan 10 14:36:00 2010 - - 1 Answers - 0 Comments
Q. i have an emachines pc model t2042' it turns on but goes directly to a black screen' unless i input the restore cd, i only i have one, is there any other ways to restoe the computer without the discs? if not where can i find any ?
Asked by Mimi K. - Sun Jan 10 14:36:00 2010 - - 1 Answers - 0 Comments
I need to find a computer product code for my emachines computer?
Q. I need a product key for my emachines computer. I am buying a restore cd but i need the 25 digit code. i have all the original manuals so if anyone knows where it is located in the manual that would be appreciated.
Asked by njs811271 - Wed Aug 26 17:07:18 2009 - - 3 Answers - 0 Comments
A. Instantly find product key and serial number from currently installed Windows, Office, SQL Server, Exchange Server and many other products.
Answered by John B - Wed Aug 26 21:52:29 2009
Q. I need a product key for my emachines computer. I am buying a restore cd but i need the 25 digit code. i have all the original manuals so if anyone knows where it is located in the manual that would be appreciated.
Asked by njs811271 - Wed Aug 26 17:07:18 2009 - - 3 Answers - 0 Comments
A. Instantly find product key and serial number from currently installed Windows, Office, SQL Server, Exchange Server and many other products.
Answered by John B - Wed Aug 26 21:52:29 2009
Can I put a re install disk of windows vista premium from emachines into my dell pc to get it?
Q. I have Windows Vista Home Basic its very limited on what the other ones can do so i thought maybe i can take my friends windows vista premium re install disc from emachines and install the operating system to my dell computer? plz help. thanks.
Asked by Crayzee Gamer - Sun Sep 27 13:01:06 2009 - - 2 Answers - 0 Comments
A. No, you can't do this. It will most likely result in a BSOF (Blue Screen Of Death) because the OS will be loading the drivers for the hardware that is supposed to be installed with the eMachine computer the recovery disc is meant to support. The drivers will clash with the hardware due to the fact that they do not match up and will most likely crash the OS. Get a hold of a Vista Home Premium OS disc (not a recovery disc), as it will come with an upgrade to the New Windows 7.
Answered by Ironfrunk - Sun Sep 27 13:14:42 2009
Q. I have Windows Vista Home Basic its very limited on what the other ones can do so i thought maybe i can take my friends windows vista premium re install disc from emachines and install the operating system to my dell computer? plz help. thanks.
Asked by Crayzee Gamer - Sun Sep 27 13:01:06 2009 - - 2 Answers - 0 Comments
A. No, you can't do this. It will most likely result in a BSOF (Blue Screen Of Death) because the OS will be loading the drivers for the hardware that is supposed to be installed with the eMachine computer the recovery disc is meant to support. The drivers will clash with the hardware due to the fact that they do not match up and will most likely crash the OS. Get a hold of a Vista Home Premium OS disc (not a recovery disc), as it will come with an upgrade to the New Windows 7.
Answered by Ironfrunk - Sun Sep 27 13:14:42 2009
Why is my eMachines mouse cursor unstable?
Q. I bought a new computer (eMachines brand), and setup everything. The only probem is that when I move the cursor, it goes unstable, and sometimes flings itself across the screen. Anybody have this problem? ): ~Thanks for whom who answers.
Asked by ThatOneArtist - Sun Jul 25 18:50:26 2010 - - 2 Answers - 0 Comments
A. Possibly defective optical sensor in the mouse. I have this problem with a dropped mouse once. And yeah the cursor flew to the right every few minutes.
Answered by jonathan240b - Sun Jul 25 18:58:42 2010
Q. I bought a new computer (eMachines brand), and setup everything. The only probem is that when I move the cursor, it goes unstable, and sometimes flings itself across the screen. Anybody have this problem? ): ~Thanks for whom who answers.
Asked by ThatOneArtist - Sun Jul 25 18:50:26 2010 - - 2 Answers - 0 Comments
A. Possibly defective optical sensor in the mouse. I have this problem with a dropped mouse once. And yeah the cursor flew to the right every few minutes.
Answered by jonathan240b - Sun Jul 25 18:58:42 2010
From Yahoo Answer Search: 'emachines'
Mon Sep 6 21:23:25 2010 [ refresh local cache ]
[Hide]▼
tech.sina.com.cn
Wed, 25 Aug 2010 00:02:40 GMT+00:00
eMachines eMD640( )G-P321G32Mn AMD 2 ...
salepriceshop.info
admin
hu, 19 Aug 2010 08:42:34 GM
Acer . eMachines. No. 727 is one of the most affordable Intel Core Duo laptop with good build quality and performance of the Nice @ low price. Following are the Technical Specification of Acer . eMachines. eMe 727 Laptop in India:- Acer ...
[Hide]▲
